The SMGR Series is a Peroxide-Cured product. It's construction consists of  a core silicone elastomer, an open polyester braid reinforcing layer and a cover layer of silicone elastomer. It is not recommended for implantable or in body uses and should be sterilized prior to use. If exposed to repeated steam sterilization or long term high temperature or pressure, silicone will eventually become gummy. It should then be replaced. All pressure testing of the product was done at room temperature.

  • Open mesh polyester braiding incorporated within the wall of silicone tubing
  • Silicone elastomer meets USP Class VI requirements
  • Translucent natural color for visual contact with the flow
  • Able to resist extreme temperature variation: -80°F to 350°F
  • Odorless, tasteless and inert
  • All ingredients are non-toxic and FDA approved

 
1 - 7 of 7 | Results Per Page | View |
1 
Clear Filter

Inside Diameter

Outside Diameter

Length

Working Pressure

Burst Pressure

Item #

Inside Diameter

Outside Diameter

Length

Working Pressure

Burst Pressure

SMGR-316-25 N/A 3/16" N/A 0.447" N/A 25' N/A 216 psi N/A 648 psi
SMGR-14-25 N/A 1/4" N/A 0.520" N/A 25' N/A 208 psi N/A 624 psi
SMGR-516-25 N/A 5/16" N/A 0.592" N/A 25' N/A 183 psi N/A 549 psi
SMGR-38-25 N/A 3/8" N/A 0.655" N/A 25' N/A 166 psi N/A 498 psi
SMGR-12-25 N/A 1/2" N/A 0.800" N/A 25' N/A 141 psi N/A 423 psi
SMGR-34-25 N/A 3/4" N/A 1.100" N/A 25' N/A 91 psi N/A 273 psi
SMGR-1-25 N/A 1" N/A 1.380" N/A 25' N/A 75 psi N/A 225 psi
1 - 7 of 7 | Results Per Page | View |
1